CNC Router Seremban

Straight Endmill
- 1/2'' x 3 x 20
- 1/2'' x 6 x 25
Cordless Barcode Reader

The Cordless Barcode Reader can be used to automate certain machine operations such as loading programs and starting the machine, and it is integral to the scanning operations of PANELTracker.


More Details...

12VDC Solenoid - 3 Ports

- The 12VDC Solenoid - 3 Port valve is the most commonly installed solenoid valve on a machine.

They are used for ATC spindles, vacuum control zones, pop up pins, and other pneumatic devices.


More Details...

Proximity Sensor
This sensor directly connects to sensor cabling.
- For AXYZ CNC router only
Infinite - ACM Phenolic 3.5" Donut
Phenolic Pressure Foot Donut is top-down mounted for mounting on Infinite Cast Pressure Feet. For Integrated Wand System.

For AXYZ CNC router only
Subconsole/Smartconsole Cable Assembly 4-Pin

- This is a direct replacement cable that can be used on both the subconsole and 4-pin SmartConsole.

Console cables are damaged by excessive stretching by cutting or impact.


More Details...

Infinite - ACM Phenolic 3.5" Donut
- Phenolic Pressure Foot Donut is top-down mounted for mounting on Infinite Cast Pressure Feet.

- For Integrated Wand System.
- For AXYZ CNC Router only

Metric O-Ring
- For AXYZ CNC router only 
Pneumatic Plunger Cylinder 7G/21G ATC
- Replacement for the pneumatic plunger for 7G/21G ATC for when it is broken or stuck up or down.
- This SKU, 050491, has a product number that starts with 'NCMB125' on the product label. Please be sure to correctly identify this prior to ordering.
Carriage Modbus REV.600
- The Carriage Modbus REV.600 is mounted inside the machine’s carriage. It connects the carriage sensors and controls for various devices available on A2MC machines.
60 AMP-800V Heavy Duty Bridge Rectifier
- The Heavy Duty Bridge Rectifier is recommended for systems with more than 4 stepper drives (multi head machines) as well as machines that have had problems with the bridge rectifiers failing.
Original Smouse/F25 Replacement Board
- The Original Smouse board will repair either an Smouse or an F25 Sensor.
Skimming Tooling
- Skimming tool for CNC router
The AXYZ Blue Glide Donut is a unique and highly durable accessory which has been developed especial

- The AXYZ Blue Glide Donut is a unique and highly durable accessory which has been developed especially for processing ACM.


More Details...

High Capacity Cast Pressure Foot

- This High Capacity Pressure foot will fit on both ELTE and HSD spindles on your AXYZ CNC Router.


More Details...

Ceramic and Glass Fuses

- Glass fuses are used to protect sensitive electronics where required.  The glass fuse holders will generally have a spare fuse in them.  Replace the spare fuse when it is used.


More Details...